SimpleUSB Port 12V-to-USB Adapter By Dongar Technologies
- Ensure that the vehicle is completely turned off
- Remove connector: completely depress the plastic tab while simultaneously pulling on the connector housing. *Do not remove connector by pulling on the harness wires*
- Insert the male-end of the SimpleUSB port into the mirror
- Connect the vehicle harness into the SimpleUSB port. You should feel or hear a ‘click’. * A red led light within the USB port will illuminate once the vehicle is turned on. This can be hard to see, especially when installed, but can be used to check whether the adapter is working.
- Connect the USB cable of your dashcam or other USB accessory. This device will now receive power once the vehicle is turned on.